ᐅ KALLAX leaning after placing a cabinet next to it – how to straighten it?
Created on: 14 Nov 2020 17:42
P
Papu63Hello everyone,
I have the following problem: I placed my KALLAX shelf from IKEA against a wall on one side and put another shelf right next to it. Since then, the KALLAX seems to be leaning, even though the floor is relatively even. I suspect it has to do with the arrangement and possibly a slight distortion caused by placing them side by side.
Now I’m wondering how I can realign the KALLAX without completely disassembling or moving it? Are there any tricks with small shims, adjustment mechanisms, or modifications that might help?
Maybe someone here in the forum has had similar experiences and can offer advice on the best way to solve this problem.
Thanks in advance for your help!
I have the following problem: I placed my KALLAX shelf from IKEA against a wall on one side and put another shelf right next to it. Since then, the KALLAX seems to be leaning, even though the floor is relatively even. I suspect it has to do with the arrangement and possibly a slight distortion caused by placing them side by side.
Now I’m wondering how I can realign the KALLAX without completely disassembling or moving it? Are there any tricks with small shims, adjustment mechanisms, or modifications that might help?
Maybe someone here in the forum has had similar experiences and can offer advice on the best way to solve this problem.
Thanks in advance for your help!
Hello Papu63,
I completely understand how frustrating it is when a piece of furniture suddenly stands crooked, even though you did everything right. I’ve experienced that myself, especially when you start wondering whether it’s the wall, the floor, or the furniture itself causing the problem.
That sounds like a very plausible explanation to me. I had a similar case once where we placed small felt pads under each leg; that can often help when the floor isn’t perfectly level.
Sometimes it’s also a matter of whether the cabinet is firmly against the wall or if it’s being slightly pushed by the second cabinet, causing it to tilt. Is there any way to adjust the screws or connection points?
I would definitely recommend carefully experimenting with small shims (felt, rubber, small pieces of wood). And don’t rush, especially since you mentioned you don’t want to fully dismantle the KALLAX.
Maybe we’ll hear more opinions and experiences. 🙂
I completely understand how frustrating it is when a piece of furniture suddenly stands crooked, even though you did everything right. I’ve experienced that myself, especially when you start wondering whether it’s the wall, the floor, or the furniture itself causing the problem.
Papu63 schrieb:
I suspect it’s related to the arrangement and possibly a slight warping
That sounds like a very plausible explanation to me. I had a similar case once where we placed small felt pads under each leg; that can often help when the floor isn’t perfectly level.
Sometimes it’s also a matter of whether the cabinet is firmly against the wall or if it’s being slightly pushed by the second cabinet, causing it to tilt. Is there any way to adjust the screws or connection points?
I would definitely recommend carefully experimenting with small shims (felt, rubber, small pieces of wood). And don’t rush, especially since you mentioned you don’t want to fully dismantle the KALLAX.
Maybe we’ll hear more opinions and experiences. 🙂
Hello,
I have read the thread and would like to explain in more detail how to methodically approach such a problem:
1. Check the floor: Often the floor is not perfectly level, which can cause even a straight cabinet to stand unevenly. You can use a spirit level to check which side is higher or lower.
2. Inspect the feet: KALLAX cabinets usually do not have adjustable feet, but sometimes small shims or rubber pads placed under the feet can help compensate for unevenness.
3. Pressure from the second cabinet: If the second cabinet is pushing the KALLAX sideways, it can cause tension and warping. A small spacer strip between the two pieces of furniture often helps reduce this pressure.
4. Wall fixing: To straighten the unit, attaching furniture brackets to secure the KALLAX to the wall can be helpful.
5. Disassemble: If nothing else works, partially disassembling the cabinet is often the simplest way to realign it.
In summary, I would first check with a spirit level, then experiment with small pads under the feet, and check the distance between the cabinets. The issue usually lies somewhere between floor unevenness and lateral pressure from the furniture.
If you provide more information about the installation site or flooring, I can offer more specific advice.
I hope this helps!
I have read the thread and would like to explain in more detail how to methodically approach such a problem:
1. Check the floor: Often the floor is not perfectly level, which can cause even a straight cabinet to stand unevenly. You can use a spirit level to check which side is higher or lower.
2. Inspect the feet: KALLAX cabinets usually do not have adjustable feet, but sometimes small shims or rubber pads placed under the feet can help compensate for unevenness.
3. Pressure from the second cabinet: If the second cabinet is pushing the KALLAX sideways, it can cause tension and warping. A small spacer strip between the two pieces of furniture often helps reduce this pressure.
4. Wall fixing: To straighten the unit, attaching furniture brackets to secure the KALLAX to the wall can be helpful.
5. Disassemble: If nothing else works, partially disassembling the cabinet is often the simplest way to realign it.
In summary, I would first check with a spirit level, then experiment with small pads under the feet, and check the distance between the cabinets. The issue usually lies somewhere between floor unevenness and lateral pressure from the furniture.
If you provide more information about the installation site or flooring, I can offer more specific advice.
I hope this helps!
G
GUSTAVO5615 Nov 2020 09:23Hello Papu63,
your problem sounds like a classic case of tension and leveling issues, which occur more often than people realize. I will explain in a bit more detail:
First, you should determine whether the tilt is caused by the following factors:
– Uneven flooring: Even if the floor looks flat, slight slopes of just a few millimeters can cause the unit to lean. A precision string level or digital spirit level can be very helpful here.
– Warping of the KALLAX modules: Since the furniture is usually made of particleboard or MDF, these materials can warp slightly under pressure or humidity.
– Lateral pressure from the adjacent cabinet: If you push the second cabinet tightly against the KALLAX, the pressure can cause it to tilt out of plumb.
To fix this, I recommend the following steps:
1. Remove the second cabinet and place the KALLAX alone against the wall.
2. Check its stability with a spirit level and mark any points where it tilts.
3. Place small wooden shims or self-adhesive rubber pads under the feet to correct the tilt. Make sure all feet have firm and stable contact with the floor.
4. If necessary, install small brackets or specialized furniture anchors to secure the KALLAX to the wall.
5. Position the second cabinet, but leave a small gap of a few millimeters to avoid lateral pressure.
6. Finally, recheck all levels with the spirit level.
One more note: If you can slightly lift and move the KALLAX, minor twisting caused by jamming is possible, which can be corrected using the mentioned shims.
Could you please provide more details about the floor type (tiles, parquet, laminate) and whether the KALLAX has any foot pads or cushioning? That would help to choose the right materials.
I hope this detailed guide brings you much closer to a solution. If you like, I can also recommend suitable materials.
your problem sounds like a classic case of tension and leveling issues, which occur more often than people realize. I will explain in a bit more detail:
First, you should determine whether the tilt is caused by the following factors:
– Uneven flooring: Even if the floor looks flat, slight slopes of just a few millimeters can cause the unit to lean. A precision string level or digital spirit level can be very helpful here.
– Warping of the KALLAX modules: Since the furniture is usually made of particleboard or MDF, these materials can warp slightly under pressure or humidity.
– Lateral pressure from the adjacent cabinet: If you push the second cabinet tightly against the KALLAX, the pressure can cause it to tilt out of plumb.
To fix this, I recommend the following steps:
1. Remove the second cabinet and place the KALLAX alone against the wall.
2. Check its stability with a spirit level and mark any points where it tilts.
3. Place small wooden shims or self-adhesive rubber pads under the feet to correct the tilt. Make sure all feet have firm and stable contact with the floor.
4. If necessary, install small brackets or specialized furniture anchors to secure the KALLAX to the wall.
5. Position the second cabinet, but leave a small gap of a few millimeters to avoid lateral pressure.
6. Finally, recheck all levels with the spirit level.
One more note: If you can slightly lift and move the KALLAX, minor twisting caused by jamming is possible, which can be corrected using the mentioned shims.
Could you please provide more details about the floor type (tiles, parquet, laminate) and whether the KALLAX has any foot pads or cushioning? That would help to choose the right materials.
I hope this detailed guide brings you much closer to a solution. If you like, I can also recommend suitable materials.
Similar topics