Hello everyone,
I own a Malm bed from IKEA and have unfortunately noticed some chipped areas on the surface. These are mostly on the edges and smaller sections, likely caused by improper handling or impacts. My question is: What is the best way to repair these chipped spots on the Malm bed so that the surface looks as close to the original as possible and remains durable? Are there specific materials or methods that have proven effective?
I would appreciate a detailed guide and tips on suitable repair products. Additionally, it would be helpful to know whether repainting or possibly applying veneer makes sense. Thanks in advance!
I own a Malm bed from IKEA and have unfortunately noticed some chipped areas on the surface. These are mostly on the edges and smaller sections, likely caused by improper handling or impacts. My question is: What is the best way to repair these chipped spots on the Malm bed so that the surface looks as close to the original as possible and remains durable? Are there specific materials or methods that have proven effective?
I would appreciate a detailed guide and tips on suitable repair products. Additionally, it would be helpful to know whether repainting or possibly applying veneer makes sense. Thanks in advance!
Hello Nauba,
First of all, your question is very well formulated and specific, which makes it much easier to provide concrete advice. I have been repairing these types of damages on Malm beds for some time and can recommend a step-by-step method:
1. Preparation: Thoroughly clean the chipped area, removing any loose particles and dust.
2. Filling: Use a wood-colored filler or an MDF repair kit (since Malm is MDF-based). Apply the filler, smooth it out, and let it dry.
3. Sanding: After drying, smooth the surface in several stages using fine sandpaper (e.g., grit 240, then 400).
4. Paint/Finish: I recommend using a suitable acrylic or furniture touch-up pen that matches the Malm tone (off-white or white). Alternatively, sprays are available, but the pen allows for better control.
5. Sealing: Finally, apply a clear protective layer, such as a satin acrylic finish.
Common mistakes are skipping the filling step or sanding too roughly, which can cause an uneven surface.
Hope this helps!
First of all, your question is very well formulated and specific, which makes it much easier to provide concrete advice. I have been repairing these types of damages on Malm beds for some time and can recommend a step-by-step method:
1. Preparation: Thoroughly clean the chipped area, removing any loose particles and dust.
2. Filling: Use a wood-colored filler or an MDF repair kit (since Malm is MDF-based). Apply the filler, smooth it out, and let it dry.
3. Sanding: After drying, smooth the surface in several stages using fine sandpaper (e.g., grit 240, then 400).
4. Paint/Finish: I recommend using a suitable acrylic or furniture touch-up pen that matches the Malm tone (off-white or white). Alternatively, sprays are available, but the pen allows for better control.
5. Sealing: Finally, apply a clear protective layer, such as a satin acrylic finish.
Common mistakes are skipping the filling step or sanding too roughly, which can cause an uneven surface.
Hope this helps!
Nabla64 schrieb:
In the end, applying a clear protective coat is recommendedHonestly, I see it a bit differently. Of course, a protective layer makes sense, but Malm is everyday furniture and constantly subjected to wear and tear. I’d rather invest in a small edge or accept another sign of use than spend time on constant repairs.
Let’s be honest: how many people really notice a chipped spot? Don’t we just have to accept that furniture is living and will show signs of use? Repairs can quickly become very time-consuming, especially on larger surfaces.
I can fully understand that such damages can be frustrating. I felt the same way and really uncomfortable whenever I looked at the bed.
What helped me was to be patient and take it step by step. And above all: don’t be too perfectionistic. The repair is never 100% invisible, but at least you can regain some pride in your furniture.
What helped me was to be patient and take it step by step. And above all: don’t be too perfectionistic. The repair is never 100% invisible, but at least you can regain some pride in your furniture.
Similar topics