Hello everyone, I am currently planning to install my new Ikea Metod kitchen and am facing the challenge of correctly fitting the Metod drawers with the soft-close feature. My question is: What is the best way to accurately and securely install the drawers with soft-close? Are there any special tips for adjusting the soft-close mechanism, and what should I definitely pay attention to ensure everything works smoothly and the drawers close gently and quietly? Any advice on tools and common mistakes to avoid would also be great. Thanks in advance!
Mulen schrieb:
What is the best way to install drawers with soft-close precisely and securely? Are there any special tips for fitting the soft-close mechanism, and what should I definitely watch out for to ensure everything works smoothly and the drawers close quietly and gently?Hello Mulen, the installation of Metod drawers with the soft-close feature is generally well documented, but I’d like to give you an overview:
- Make sure to mount the rails straight and at the same height inside the cabinet. This is crucial for smooth closing.
- The soft-close mechanism is usually attached at the rear part of the rail. It locks in automatically when installed correctly.
- Before attaching the drawer front, check that the soft-close mechanism operates smoothly.
- Use the provided screw positions to avoid any jamming.
In terms of tools, a cordless drill with torque control, a spirit level, and a ruler or tape measure are recommended. Common mistakes occur from installing the rails crooked or twisted.
I hope this helps you!
I can understand how tricky this can be – I also had concerns at first about whether everything was aligned properly and if the soft-close function would actually operate smoothly in the end. A tip from me: proceed very carefully during installation and keep testing the drawer closing repeatedly as you go.
I can only confirm that. On my first attempt, I installed a drawer crookedly and only after some trial and error did I realize that was the cause of the jamming. So be patient – it’s worth it!
laume schrieb:
Make sure to attach the rails straight and at the same height inside the cabinet. This is crucial for smooth closing.
I can only confirm that. On my first attempt, I installed a drawer crookedly and only after some trial and error did I realize that was the cause of the jamming. So be patient – it’s worth it!
Ah, Metod with soft-close – that’s a little luxury you allow yourself! 😎
I think the fun is also in the details: properly aligned rails, neatly inserted drawers, and the wonderful, almost magical sound when the soft-close spring snaps. Simply delightful!
A little tip from me: when inserting the drawers, lift them slightly and then slide them back in; this helps the mechanism engage correctly faster, and you’ll hear the click right away.
Assembling Metod can be frustrating, but the result makes it all worthwhile.
I think the fun is also in the details: properly aligned rails, neatly inserted drawers, and the wonderful, almost magical sound when the soft-close spring snaps. Simply delightful!
A little tip from me: when inserting the drawers, lift them slightly and then slide them back in; this helps the mechanism engage correctly faster, and you’ll hear the click right away.
Assembling Metod can be frustrating, but the result makes it all worthwhile.
Mulen schrieb:
Are there any special tips for fitting the soft-close mechanism, and what should I definitely pay attention to so that everything works smoothly and the drawers close gently and quietly?It is important to align the drawer slides precisely. The soft-close components only function properly if the slide is not twisted or misaligned. This can be achieved by:
- Measuring and marking on the inside of the cabinet carcass
- Using a spirit level
- Carefully tightening the mounting screws to avoid twisting
The soft-close mechanism itself is usually pre-assembled and should remain undisturbed during installation. If there are adjustment issues, many soft-close models have adjustment screws or adjustable holding clips.
One additional tip: After installation and initial testing, check regularly, as drawers can settle slightly after a few days.
Similar topics