ᐅ Painted Kallax surface is chipping—how can I repair it?

Hello everyone,

Some time ago, I bought a painted Kallax shelf unit, which is quite well made. However, I recently noticed that the painted surface is chipping off in some areas—especially along the edges and corners. It appears that the paint has loosened either due to mechanical stress or moisture.

I would like to know how to properly repair these paint damages so that the repair is not noticeable and the area doesn’t suffer further damage.

It would be helpful to get specific advice on which materials and tools to use, and whether any preparation is needed before the repair, such as sanding, cleaning, or priming.

Has anyone had experience with painted furniture from Kallax or similar products that had this kind of damage?

Thanks in advance for your help!

Hi,

It is best to gently sand off any loose paint, then clean the surface and apply a suitable acrylic paint with a fine brush. After that, lightly sand again and, if necessary, apply another coat of paint.

Hi sebastianl,

it’s a shame that your Kallax is splintering! 😕 I understand how frustrating that is.

My advice: gently sand the damaged area first, then apply a small amount of high-quality furniture acrylic paint. 🙂 This usually lasts longer and looks better. Good luck with it!

Hello sebastianl,

great that you want to tackle the repair yourself! 😊 Paint damage is not that bad if you approach it correctly. With the right paint and small brushes, it can be fixed really well. Keep at it, you’ll succeed!

Tatovin schrieb:
best to gently sand off the loose paint

Thanks for the tip!
Would you recommend sanding only the damaged areas or lightly roughening the entire surface?

And what is the best way to clean the area afterwards? Just with some soapy water?

Sebastianl,

basically, it is sufficient to mechanically sand only the damaged areas to remove loose paint residues and ensure better adhesion. The surface should be treated with fine-grit sandpaper (grit 220-320) at minimum.

Afterwards, it is recommended to clean the area with a lint-free cloth and isopropanol or denatured alcohol, as regular soapy water can leave residues that may affect adhesion.

This way, you create the best conditions for the new paint application.