ᐅ Are there any helpful video tutorials for assembling the IKEA Hemnes furniture?

Domau0 schrieb:
Regarding the drawers and hinges: Assembly was a bit tricky for me, especially because it’s often unclear whether the two sides of the drawer need to be perfectly aligned or if some tolerance is acceptable.

Thanks for the tip – that’s exactly what I mean. I’m concerned about assembling the drawers crooked, which might cause everything to jam later on. Do these videos also include advice on how to check or correct this? Details like that would be really helpful, as I haven’t found clear guidance so far.

Hello Stasju,

I work a lot with furniture assembly and can confirm Domau0’s concerns—especially when it comes to drawers, which require careful attention because precise measurements are crucial.

Regarding videos, look specifically for those showing detailed measurement and adjustment of drawers. I once found a tutorial demonstrating the entire process using calipers to achieve perfect alignment.

A few basics:
- The two sides of the drawer really need to be parallel; even a one millimeter (0.04 inch) deviation can affect functionality later on.
- A line laser can help with measuring; it’s a bit more expensive but very effective.
- The leverage effect of screws on the hinges can make adjustment easier—this should be explained in the tutorial.

If you want, I can write down the key points in more detail or provide an overview of the videos I recommend.

In summary, I would say:

- There are helpful video tutorials for assembling the IKEA Hemnes, but most of them are quite generic.
- For specific tips on drawers and hinges, look for more detailed videos that cover adjustment and tolerances.
- Tutorials tailored to the particular model are generally more relevant, as the Hemnes has some unique features (e.g., sturdy wooden dowels, special hinges).

Finding a complete video instruction that also addresses all potential sources of error in detail is possible but not common.

My recommendation: use a combination of video and written instructions—this provides the greatest reliability.

Hey Stasju and everyone else,

I admit, I'm not a professional tradesperson, but a few weeks ago I assembled the Hemnes dresser – using a video that explained everything in a very easygoing way.

What helped me the most:
- The explanations were casual and not too technical – perfect for people like me.
- The videos also showed how to avoid mistakes without being annoying.

And if you need a little laugh during assembly, you’ll find that there too 🙂

So, there are definitely helpful videos out there, you just have to search a bit more specifically.

Stasju schrieb:
I am worried about assembling the drawers crookedly, which might cause them to stick later. Do these videos also include tips on how to check or correct this?

Yes, that is an important point that is often overlooked. Good videos demonstrate how to:
- use a spirit level or simple tools to ensure the alignment of individual components
- initially tighten screws only loosely to allow for adjustments later
- identify and compensate for minor distortions or uneven drill holes

Targeted correction of the drawer position and proper tightening of the hinges are explained in detail in quality tutorials.

I would add that having the right tools often makes a big difference. For example, a cordless drill with a torque setting is better than the included Allen key for installing screws precisely without over-tightening.

Videos that also showcase tools are therefore especially helpful. Some Hemnes assembly videos also show small hacks, such as how to thread the rails more easily or how to correctly secure the back panel.