ᐅ Water pipe punctured – how to repair without extensive demolition?

Hello,

I only wanted to replace a toilet paper holder, but when removing the old holder, I loosened a screw and suddenly water shot out of the anchor with considerable pressure. It’s a mystery to me why this wasn’t noticed during installation over 10 years ago. I have now turned off the main water valve and injected silicone into the anchor. After reopening the main valve, the pipe appears to be completely sealed, which at least prevents water damage.

My question is: what tools would you recommend to expose the pipe with minimal damage, and what would I need for the repair? I can upload photos if necessary.

Thanks in advance.

MasterPDFStamp schrieb:

Main valve reopened and the pipe now seems completely sealed, which at least prevents water damage.

Are you sure the water isn’t still dripping into the masonry?

MasterPDFStamp schrieb:

My question: what tools would you recommend to expose the pipe with minimal demolition?

Hammer and chisel or a rotary hammer.

MasterPDFStamp schrieb:

What do I need for the repair?

Pipe clamp, new pipe section, pressing tool, or other items. It depends on the extent of the damage.

But “causing only very little damage” won’t be enough for the repair.

Just as @nordanney described: Open it up and take local action. And do so very promptly.

Thanks for the responses! I will probably have a professional handle this instead.
Regards