Hello everyone,
I am currently looking for a 200cm (79 inches) long outdoor garden table.
The table should be weather-resistant since it will be kept outside all year round. It also needs to be rainproof because, honestly, I don’t want to cover it every time it rains.
Additionally, the maintenance should be very low (so wood might not be suitable?).
Which material for the tabletop would be most suitable in this case?
Do you have any experience you can share?
The materials should be available within a budget of up to 500€.
I am currently looking for a 200cm (79 inches) long outdoor garden table.
The table should be weather-resistant since it will be kept outside all year round. It also needs to be rainproof because, honestly, I don’t want to cover it every time it rains.
Additionally, the maintenance should be very low (so wood might not be suitable?).
Which material for the tabletop would be most suitable in this case?
Do you have any experience you can share?
The materials should be available within a budget of up to 500€.
I am currently considering ordering a fairly large HPL panel measuring 300 x 150 cm (118 x 59 inches) through an acquaintance.
However, I will also need a suitable frame or substructure for it. Does anyone have experience with how this can be properly installed? I don’t think four aluminum legs alone will be sufficient, right?
I imagine it would be difficult to secure the legs to a tabletop thickness of only 8 mm (0.3 inches)... Would it be better to place the panel on a frame structure instead?
However, I will also need a suitable frame or substructure for it. Does anyone have experience with how this can be properly installed? I don’t think four aluminum legs alone will be sufficient, right?
I imagine it would be difficult to secure the legs to a tabletop thickness of only 8 mm (0.3 inches)... Would it be better to place the panel on a frame structure instead?
mr.xyz1 schrieb:
I would go with a frame structure and glue the panel. A thin panel alone doesn’t have enough stability and will bend.With a frame structure, the dimensions can really become a challenge. I have no idea where to get something like that – ideally, it should be made from aluminum.
Prager91 schrieb:
With a frame structure, the dimensions get really tricky. No idea where to get something like that – ideally it should be made of aluminum. I might also consider having the panel cut to about 250cm (98 inches) by 120cm (47 inches).
Does anyone have experience with an 8mm HPL construction on aluminum legs?
Similar topics