Hello,
I am a beginner when it comes to the internet and I want to set up a Wi-Fi router in the basement of a new house. Then, on the ground floor, first floor, and attic, I want to connect a device to a LAN outlet that receives the signal from the LAN cable, and then both broadcasts Wi-Fi and provides a LAN port so that it is possible to connect directly via LAN cable without disabling the Wi-Fi. Ideally, the device would be powered by a plug-in power adapter and, if possible, be wall-mounted. Does something like this exist? If yes, which devices would you recommend? Or is having a LAN port on the device unnecessary because the Wi-Fi signal in the room is likely to be very good?
Thanks in advance for your answers.
Best regards from Tom
I am a beginner when it comes to the internet and I want to set up a Wi-Fi router in the basement of a new house. Then, on the ground floor, first floor, and attic, I want to connect a device to a LAN outlet that receives the signal from the LAN cable, and then both broadcasts Wi-Fi and provides a LAN port so that it is possible to connect directly via LAN cable without disabling the Wi-Fi. Ideally, the device would be powered by a plug-in power adapter and, if possible, be wall-mounted. Does something like this exist? If yes, which devices would you recommend? Or is having a LAN port on the device unnecessary because the Wi-Fi signal in the room is likely to be very good?
Thanks in advance for your answers.
Best regards from Tom
Connect all stationary devices to the LAN and only mobile devices to the Wi-Fi. LAN is much faster and supports full duplex.
You need a router or, in your case, an all-in-one box. With so little knowledge in this area, this is the best solution.
A patch panel and a switch.
Then install a LAN outlet for the access points on each floor. The Fritz models do not support PoE and therefore each requires a separate power outlet.
Depending on the model, some also have a LAN port, but this is still a workaround.
There are many manufacturers offering PoE, but then you have to configure the access points separately.
Additionally, install LAN outlets in the living room, offices, children’s rooms, etc. Always run duplex cables.
Have you already built or are you still in the planning phase? If the latter, please plan properly to avoid creating problems that can only be fixed with significant money and effort.
Search for relevant threads. For Wi-Fi, the standard, types of obstacles, number of devices, and other factors also matter.
You need a router or, in your case, an all-in-one box. With so little knowledge in this area, this is the best solution.
A patch panel and a switch.
Then install a LAN outlet for the access points on each floor. The Fritz models do not support PoE and therefore each requires a separate power outlet.
Depending on the model, some also have a LAN port, but this is still a workaround.
There are many manufacturers offering PoE, but then you have to configure the access points separately.
Additionally, install LAN outlets in the living room, offices, children’s rooms, etc. Always run duplex cables.
Have you already built or are you still in the planning phase? If the latter, please plan properly to avoid creating problems that can only be fixed with significant money and effort.
Search for relevant threads. For Wi-Fi, the standard, types of obstacles, number of devices, and other factors also matter.
Tom Ezio schrieb:
I am an "internet novice",It shows – otherwise, just searching for the term "Access Point" here would have already brought up a ton of detailed explanations answering your questions.https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
A
allstar8311 Feb 2023 20:37Here is a packing list for beginners. I use switches, cameras, and access points from Unify/Ubiquity.
This makes configuration really easy, basically through a mobile app.
Good luck
This makes configuration really easy, basically through a mobile app.
- 19-inch network rack, about 10 rack units (10 HE)
- Patch panel. This is where the cables are connected and then plugged into the respective switch ports using short cables
- Switch. Depending on your needs, 16 to 24 ports are usually sufficient. The switch should have PoE ports to power devices like access points or cameras through the cable.
- Power strip installed inside the network rack
- About 30 patch cables, around 20cm (8 inches) long
- In my case, also a Unify Cloud Gen2. Provides remote access and camera recording
- Access points. I have 3: two indoors, one outside in the shed.
Good luck
hanse987 schrieb:
Are you just starting the house planning process, or is the house already ready to move in?Tom Ezio schrieb:
We are beginning to look into the topic of "buying a house" and have a specific offer in mind, but we cannot yet assess its "quality" due to a lack of knowledge.
It concerns a semi-detached house designed by a developer.That was eight and a half years ago – some background information about the history during that time would be helpful: Was the house considered back then actually moved into, are you still searching, or is something new currently being planned?https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
Similar topics