Hey everyone,
I was really lucky to get a plot of land of about 320m² (3445 sq ft) from a municipality near Augsburg at a very favorable price, where the current market value should be about three times higher.
We plan to build a house within the next three years, but we’re not sure yet how, where, or what exactly. At the moment, we lean towards a prefabricated house because it supposedly means less stress, as everything comes from a single source, and it might also be cheaper and more affordable than a solid (brick-and-mortar) house.
We’ve already had an initial consultation with a traditional solid house builder, and with my desired specifications of
- 2 full floors (excluding the roof)
- 3 bedrooms on the upper floor
- possibly with a basement that must be completely waterproof and protected against upward water pressure according to the development plan (the builder said the basement alone would cost around 60,000 to 80,000 euros)
the price is significantly over half a million euros.
I plan to schedule appointments with several prefabricated house suppliers in the Augsburg area (radius about 250km (155 miles)) in the coming months to hear what they have to offer.
In the end, I’m not asking for public recommendations for house suppliers here (maybe privately via PM), but rather I want to approach everything correctly and avoid unnecessary stress. I’m sure many future homeowners would wish for that.
It could be helpful if people shared their own mistakes here and explained how they would have done things better. That would benefit everyone planning to build in the future.
Personally, from my current research, I find the company Town & Country interesting because they build solid houses and are reportedly affordable. I might also have been influenced a bit by a Galileo documentary.
I also find the block construction method from Dennert appealing, as it looks very stable and you don’t see wood sticking out everywhere during construction.
What puts me off a little is seeing so much wood in prefabricated houses. I somehow associate that with it not being stable over many years. Is that just a prejudice?
My first questions are:
During the few days or months that the house is being built, should an external surveyor/inspector be hired to periodically check on the construction and provide feedback?
Are there any prefabricated house suppliers that deliver truly turnkey homes? Meaning you only need to bring in your furniture and belongings. Ideally, this would also include outdoor features like a terrace, paving stones, fence, etc.
I was really lucky to get a plot of land of about 320m² (3445 sq ft) from a municipality near Augsburg at a very favorable price, where the current market value should be about three times higher.
We plan to build a house within the next three years, but we’re not sure yet how, where, or what exactly. At the moment, we lean towards a prefabricated house because it supposedly means less stress, as everything comes from a single source, and it might also be cheaper and more affordable than a solid (brick-and-mortar) house.
We’ve already had an initial consultation with a traditional solid house builder, and with my desired specifications of
- 2 full floors (excluding the roof)
- 3 bedrooms on the upper floor
- possibly with a basement that must be completely waterproof and protected against upward water pressure according to the development plan (the builder said the basement alone would cost around 60,000 to 80,000 euros)
the price is significantly over half a million euros.
I plan to schedule appointments with several prefabricated house suppliers in the Augsburg area (radius about 250km (155 miles)) in the coming months to hear what they have to offer.
In the end, I’m not asking for public recommendations for house suppliers here (maybe privately via PM), but rather I want to approach everything correctly and avoid unnecessary stress. I’m sure many future homeowners would wish for that.
It could be helpful if people shared their own mistakes here and explained how they would have done things better. That would benefit everyone planning to build in the future.
Personally, from my current research, I find the company Town & Country interesting because they build solid houses and are reportedly affordable. I might also have been influenced a bit by a Galileo documentary.
I also find the block construction method from Dennert appealing, as it looks very stable and you don’t see wood sticking out everywhere during construction.
What puts me off a little is seeing so much wood in prefabricated houses. I somehow associate that with it not being stable over many years. Is that just a prejudice?
My first questions are:
During the few days or months that the house is being built, should an external surveyor/inspector be hired to periodically check on the construction and provide feedback?
Are there any prefabricated house suppliers that deliver truly turnkey homes? Meaning you only need to bring in your furniture and belongings. Ideally, this would also include outdoor features like a terrace, paving stones, fence, etc.
S
selcuk55li14 Feb 2022 10:12K a t j a schrieb:
Not necessarily. This issue still seems to need some time. If the municipality already knows the square meters, they probably also know the approximate dimensions of the plot—at least roughly. I would actually just go there in person and also check who the neighbor to the west is, whether they really want the driveway at the top, what’s happening with the southern access, and of course who the neighbor to the east is.
Is there already a geotechnical report? What does it say? Yes, there is a geotechnical survey/soil investigation report.
But I don’t think this report covers only my plot.
What exactly is in it is a very good question, since I don’t really understand the subject.
It’s 269 pages long and includes photos of the soil because samples were taken.
Should I specifically look for anything in particular, or am I allowed to upload the PDF file here?
B
blubbernase14 Feb 2022 10:12selcuk55li schrieb:
Site planIf it is to scale, you can simply measure it using your PDF tool.S
selcuk55li14 Feb 2022 10:14blubbernase schrieb:
If it’s to scale, you can simply measure it using your PDF tool.Yes, that looks good. The site plan is a PDF document, and the scale (1:500) is indicated at the edge. I’ll give it a try. Thanks
selcuk55li schrieb:
There are 269 pages, which also include images of the soil samples because tests were conducted.
Should I specifically look for certain information, or is it okay to upload the PDF file here?
Wow, no one wants to read all that. Maybe there is a summary with a foundation recommendation towards the very end. That would be interesting. However, it might not be included because the report wasn’t prepared specifically for your plot, but for the entire development area and for a different purpose.
S
selcuk55li14 Feb 2022 11:15familie_s schrieb:
The BayernViewer has a measuring tool; here I get the following approximate dimensions:
20m (65.6 ft) on the east/west edge
16m (52.5 ft) on the north/south edgeWow, thank you very much. I've been trying with Adobe Reader for almost an hour and get all kinds of strange numbers.