ᐅ MM Window Construction Minden / North Rhine-Westphalia – Experiences

While searching for window offers, we came across the company MM Fensterbau from Minden.

Has anyone already purchased windows and the front door from this company and can share their experiences?

Thank you in advance 🙂

DaniMartinez schrieb:

While searching for window offers, we came across the company MM Fensterbau from Minden.

You yourself mentioned them here:

DaniMartinez schrieb:

Does anyone have experience with MM Fensterbau from Minden? They install Drutex windows and doors from Poland …

And regarding Drutex, you’ll find mixed but not overly negative comments here in the forum. Because Drutex is from Poland – quite affordable. By the way, am I correct that I haven’t seen any pictures of your house yet?
https://www.hausbau-forum.de/threads/efh-am-suedhang-mit-ug-eg-150-160qm.36890/page-3#post-445777

My basic opinion (large fixed and tilt-turn elements preferably aluminum, otherwise PVC is fine by me) is already known.

---

https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/

11ant schrieb:

Here’s what I found from you on those.

As for Drutex, the forum contains some mixed reviews—not bad, but somewhat varied.
By the way, am I correct in assuming that I haven’t seen any views yet of your house
https://www.hausbau-forum.de/threads/efh-am-suedhang-mit-ug-eg-150-160qm.36890/page-3#post-445777?
My basic preference is known: for large and street-facing elements, I prefer aluminum; otherwise, PVC is acceptable.

Yes, that’s true—I was quite discouraged by the comments back then and didn’t post any further!
From what size do you consider elements to be “large” and street-facing?
Our lift-and-slide door is 2.70 x 2.20m (8.9 x 7.2 ft); would you recommend aluminum for that?

DaniMartinez schrieb:

Yes, it’s true I was quite down after the comments back then and didn’t post anything further!

Hopefully you have recovered well by now and can share your views to help us help you.

DaniMartinez schrieb:

From what size do your large and stressed elements start?
For our lift-and-slide door measuring 2.70 x 2.20 meters (8 ft 10 in x 7 ft 3 in), would it be better to use aluminum?

I always categorize lift-and-slide doors as stressed elements, but a 270 cm (8 ft 10 in) wide lift-and-slide door is hopefully a typo (?)

---

https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/

11ant schrieb:

I hope you have recovered well by now and can post some views to help us help you.

I always consider a lift-and-slide door a patio or terrace element, but hopefully, a lift-and-slide door with a width of 270cm (106 inches) is a typo (?)

No, actually not!! 2.70m (8 ft 10 in) is not wide enough 😀