ᐅ Optimal finished floor height relative to the street level

Created on: 29 Sep 2017 19:45
W
winnetou78
Hi,

We received our building permit / planning permission two weeks ago. It includes a recommendation to raise the house by an additional 25 cm (10 inches), but this is only a suggestion. However, it is a bit unsettling. Currently, the plan is for the finished floor level to be 15 cm (6 inches) higher than the street level. I actually thought this would be enough. The street is about 10 m (33 feet) away and slopes down towards the opposite side of the street.

What do you think about this?

Daniel
i_b_n_a_n9 Jun 2021 20:54
So, now you have the reference point for the finished floor level. Next, we still need the building plan excerpt in which the reference point for the ridge height is specified.
M
Mateo84
9 Jun 2021 21:07
Great, that’s what you mean. Unfortunately, I can’t find anything about a specific reference point:

Photo of a text document with the heading '4.2. Measure of structural use'.
i_b_n_a_n9 Jun 2021 21:26
It must be stated somewhere in the zoning plan. The excerpts sound almost like ours 😉

Are you building in NRW? If you want, you can also mention the zoning plan (no link). I assume you are building in WA2?
M
Mateo84
9 Jun 2021 21:39
Hmm no in Lower Saxony, pm me….. 🙂
M
Mateo84
10 Jun 2021 06:33
i_b_n_a_n schrieb:

It must be specified somewhere in the development plan. The excerpts sound almost like ours 😉
Are you building in NRW? If you want, you can also mention the development plan (no link). I assume you are building in WA2?

Could you send me a private message? Unfortunately, I don’t have enough posts for that.

Best regards
i_b_n_a_n10 Jun 2021 07:22
Then unfortunately you won’t be able to receive any either 🙄 (and I just realized I can’t either :mad 🙂