Hello!
I'll start.
Heated area 200m2 (2,153 sq ft)
KfW 55 standard
Mechanical ventilation with heat recovery
Current outdoor temperature 6°C (43°F)
Heating energy consumption including hot water 35 kWh
Electricity consumption 9 kWh
COP 3.88
I'll start.
Heated area 200m2 (2,153 sq ft)
KfW 55 standard
Mechanical ventilation with heat recovery
Current outdoor temperature 6°C (43°F)
Heating energy consumption including hot water 35 kWh
Electricity consumption 9 kWh
COP 3.88
A
Alessandro18 Jan 2021 10:26But what does the nominal flow rate actually indicate?
Your heat pump modulates, which means the flow rate is constantly changing.
Your heat pump modulates, which means the flow rate is constantly changing.
Alessandro schrieb:
But what does the nominal flow rate really indicate?
Your heat pump modulates, which means the flow rate is constantly changing.No, it is not a modulating heat pump.A
Alessandro18 Jan 2021 11:15Then you need to adjust the compressor capacity to match your house or your heating load in order to reach the nominal volume flow.
However, I think you have to go to the "expert level" or "technician level" in the menu for that.
However, I think you have to go to the "expert level" or "technician level" in the menu for that.
tomtom79 schrieb:
Have you started a thread in the other forum?Yes, I have. No response for 2 weeks.Similar topics