ᐅ Modernist Concrete Villa with Cavity Wall Insulation – Experiences
Created on: 11 Sep 2018 07:32
R
rick2018
Hello everyone,
I just wanted to briefly introduce myself and say thank you.
For about a year and a half, I have been a silent reader here to gather inspiration and especially to gain more knowledge about construction technology.
Now a bit about me:
After more than a year of searching for a plot of land, I was able to purchase one from a developer who couldn’t move forward quickly with his plans.
So we found our dream plot (good location, 2500 m² (0.62 acres), slight slope, underground private spring that we have to preserve and are allowed to use).
There was an old house on the property, which we have since demolished.
There is no zoning plan, so §34 applies. During an initial informal inquiry at the building authority, almost everything we planned was rejected.
So we submitted an official preliminary building inquiry, involved the right people, and had lengthy discussions. In the end, we received a positive decision.
Therefore, there is nothing standing in the way of the building permit. The building permit should be granted within the next few weeks as there are no changes from the preliminary inquiry.
My wife (37) and I (36) want to build a Bauhaus-style villa in southern Baden-Württemberg.
It will be constructed from concrete (with core insulation) or in combination with insulated precast elements.
A lot of glass (full-glass system), textile shading, KNX, fast network both wired and wireless, strong mechanical ventilation with additional cooling coils, stainless steel pool, large cistern, and more.
The electrical planning must be 100% spot on since it’s almost impossible to make changes afterward.
Since I am friends with an architect from a larger firm, it was clear which route we would take. Such a house can basically only be realized with an architect.
I also personally know the electrician and KNX system integrator, as well as the owners and work approach of the heating, plumbing, and ventilation companies involved.
Some trades have already been contracted, and part of the equipment has already been ordered.
I’m really looking forward to getting started and to the final result. The goal is to move in by the end of 2019.
Once again, many thanks for the information I have received from you so far.
If you have any questions, just let me know.
Attached is the design, though not the final version. There have been a few minor changes.
Greetings from Swabia
I just wanted to briefly introduce myself and say thank you.
For about a year and a half, I have been a silent reader here to gather inspiration and especially to gain more knowledge about construction technology.
Now a bit about me:
After more than a year of searching for a plot of land, I was able to purchase one from a developer who couldn’t move forward quickly with his plans.
So we found our dream plot (good location, 2500 m² (0.62 acres), slight slope, underground private spring that we have to preserve and are allowed to use).
There was an old house on the property, which we have since demolished.
There is no zoning plan, so §34 applies. During an initial informal inquiry at the building authority, almost everything we planned was rejected.
So we submitted an official preliminary building inquiry, involved the right people, and had lengthy discussions. In the end, we received a positive decision.
Therefore, there is nothing standing in the way of the building permit. The building permit should be granted within the next few weeks as there are no changes from the preliminary inquiry.
My wife (37) and I (36) want to build a Bauhaus-style villa in southern Baden-Württemberg.
It will be constructed from concrete (with core insulation) or in combination with insulated precast elements.
A lot of glass (full-glass system), textile shading, KNX, fast network both wired and wireless, strong mechanical ventilation with additional cooling coils, stainless steel pool, large cistern, and more.
The electrical planning must be 100% spot on since it’s almost impossible to make changes afterward.
Since I am friends with an architect from a larger firm, it was clear which route we would take. Such a house can basically only be realized with an architect.
I also personally know the electrician and KNX system integrator, as well as the owners and work approach of the heating, plumbing, and ventilation companies involved.
Some trades have already been contracted, and part of the equipment has already been ordered.
I’m really looking forward to getting started and to the final result. The goal is to move in by the end of 2019.
Once again, many thanks for the information I have received from you so far.
If you have any questions, just let me know.
Attached is the design, though not the final version. There have been a few minor changes.
Greetings from Swabia
@kbt09, in certain areas one gender group is clearly more represented than the other....
Why are you reacting like this and calling me chauvinistic...?
It’s simply because you are annoyed due to other threads and my statements…. I call that freedom of expression.
Either you have to accept it or you are out of luck… as long as I don’t personally attack anyone, everything is fine….
Why are you reacting like this and calling me chauvinistic...?
It’s simply because you are annoyed due to other threads and my statements…. I call that freedom of expression.
Either you have to accept it or you are out of luck… as long as I don’t personally attack anyone, everything is fine….
11ant schrieb:
Still: why are all cables yellow? – Color helps with organization.That makes more sense in the server cabinet. You handle the installation cables once and connect them to the patch panel. Afterwards, you connect the switch ports to the patch panel ports using short patch cables. That’s where you can use colors (e.g., all access points get white patch cables, all cameras get black ones, and so on).
In fact, the color options for patch cables are quite limited, so one cable manufacturer might not be enough for Rick if he wants to work with colors.
In my cabinet, for example, I have
Draka green
1attack green
because otherwise, the color selection wouldn’t have been sufficient.
@superzapp
The patch cables are color-coded by (V)Lans, functions, and locations.
I'm not sure about the manufacturer at the moment. I need to check tomorrow.
It's CAT7 with more than 1000 MHz. We initially wanted to go with CAT8, but it doesn't really provide any advantage for us and was more expensive right now...
The patch cables are color-coded by (V)Lans, functions, and locations.
I'm not sure about the manufacturer at the moment. I need to check tomorrow.
It's CAT7 with more than 1000 MHz. We initially wanted to go with CAT8, but it doesn't really provide any advantage for us and was more expensive right now...
K
knalltüte2 May 2020 15:27dhd82 schrieb:
...
In fact, the choice of colors for patch cables is not very wide either; for Rick, one cable manufacturer might not be enough if he wants to work with colors.
In my cabinet, for example, I have
Draka green
1attack green
because otherwise the selection of colors would not have been sufficient.Well, actually, it is. There are plenty of colors available, especially from brand-name manufacturers.
Unless you really need more than 6-8 colors, but that is rarely the case.
Telephony, LAN, possibly DMZ for a private area, cameras (PoE?), router (WAN), NAS, server...
Then feel free to mix manufacturers, because (as [B]dhd82 mentioned) green is not always the same green.
Similar topics