ᐅ Poor Wi-Fi Coverage Despite Using a Range Extender – What Can Be Done?

Created on: 15 Jan 2020 13:39
C
chewbacca123
Hello everyone,

We have a single-family home with two floors (built on a slope, ground floor + basement). Our router is located in the basement in the utility room. We have a Wi-Fi repeater in the hallway on the ground floor, but the signal is very poor. Our internet connection speed is 50,000 (50,000), so it should work fine. Our PCs and TVs are connected to the internet directly via Ethernet cables and don’t rely on Wi-Fi. However, Wi-Fi coverage for phones and tablets on the ground floor is weak.

Can anyone recommend a repeater that offers better performance? Currently, we are using the TP Link RE 450 AC 1750.

There must be good options that can be connected to the internet via Ethernet cable and then broadcast Wi-Fi. I haven’t found any yet, but such devices must exist, right?

Thanks in advance,
Best regards
chewbacca12325 Jan 2020 07:53
rick2018 schrieb:

Is it running as a repeater or access point on the LAN?
As a repeater
rick201825 Jan 2020 08:29
No other option?
Even with mesh, you lose performance.
But the main thing is that it’s clearly better than before now and you are satisfied.
chewbacca12325 Jan 2020 09:18
rick2018 schrieb:

No other option?
Even with mesh, you lose some performance.
But the main thing is that it’s clearly better than before and you’re satisfied.

It says it’s somehow mesh capable. But since we are very satisfied for now, we’ll leave it at that. Still, it’s good to know that there’s room for improvement.
rick201825 Jan 2020 09:20
The Fritz devices should already work as a mesh network with the Fritzbox. You probably don’t need to adjust any additional settings for that.
rick201825 Jan 2020 09:25
Thanks for the information. I assumed that mesh would be preselected for such a consumer appliance...
truce25 Jan 2020 12:39
Since my previous post was deleted due to an "unauthorized link" to AVM, here is my text again:
Well, you do have to set it up as a mesh from the start..

And as a replacement for the link
Just google the following sentence....

7590 FRITZ!Repeater setup in mesh