ᐅ Modernist Concrete Villa with Cavity Wall Insulation – Experiences
Created on: 11 Sep 2018 07:32
R
rick2018
Hello everyone,
I just wanted to briefly introduce myself and say thank you.
For about a year and a half, I have been a silent reader here to gather inspiration and especially to gain more knowledge about construction technology.
Now a bit about me:
After more than a year of searching for a plot of land, I was able to purchase one from a developer who couldn’t move forward quickly with his plans.
So we found our dream plot (good location, 2500 m² (0.62 acres), slight slope, underground private spring that we have to preserve and are allowed to use).
There was an old house on the property, which we have since demolished.
There is no zoning plan, so §34 applies. During an initial informal inquiry at the building authority, almost everything we planned was rejected.
So we submitted an official preliminary building inquiry, involved the right people, and had lengthy discussions. In the end, we received a positive decision.
Therefore, there is nothing standing in the way of the building permit. The building permit should be granted within the next few weeks as there are no changes from the preliminary inquiry.
My wife (37) and I (36) want to build a Bauhaus-style villa in southern Baden-Württemberg.
It will be constructed from concrete (with core insulation) or in combination with insulated precast elements.
A lot of glass (full-glass system), textile shading, KNX, fast network both wired and wireless, strong mechanical ventilation with additional cooling coils, stainless steel pool, large cistern, and more.
The electrical planning must be 100% spot on since it’s almost impossible to make changes afterward.
Since I am friends with an architect from a larger firm, it was clear which route we would take. Such a house can basically only be realized with an architect.
I also personally know the electrician and KNX system integrator, as well as the owners and work approach of the heating, plumbing, and ventilation companies involved.
Some trades have already been contracted, and part of the equipment has already been ordered.
I’m really looking forward to getting started and to the final result. The goal is to move in by the end of 2019.
Once again, many thanks for the information I have received from you so far.
If you have any questions, just let me know.
Attached is the design, though not the final version. There have been a few minor changes.
Greetings from Swabia
I just wanted to briefly introduce myself and say thank you.
For about a year and a half, I have been a silent reader here to gather inspiration and especially to gain more knowledge about construction technology.
Now a bit about me:
After more than a year of searching for a plot of land, I was able to purchase one from a developer who couldn’t move forward quickly with his plans.
So we found our dream plot (good location, 2500 m² (0.62 acres), slight slope, underground private spring that we have to preserve and are allowed to use).
There was an old house on the property, which we have since demolished.
There is no zoning plan, so §34 applies. During an initial informal inquiry at the building authority, almost everything we planned was rejected.
So we submitted an official preliminary building inquiry, involved the right people, and had lengthy discussions. In the end, we received a positive decision.
Therefore, there is nothing standing in the way of the building permit. The building permit should be granted within the next few weeks as there are no changes from the preliminary inquiry.
My wife (37) and I (36) want to build a Bauhaus-style villa in southern Baden-Württemberg.
It will be constructed from concrete (with core insulation) or in combination with insulated precast elements.
A lot of glass (full-glass system), textile shading, KNX, fast network both wired and wireless, strong mechanical ventilation with additional cooling coils, stainless steel pool, large cistern, and more.
The electrical planning must be 100% spot on since it’s almost impossible to make changes afterward.
Since I am friends with an architect from a larger firm, it was clear which route we would take. Such a house can basically only be realized with an architect.
I also personally know the electrician and KNX system integrator, as well as the owners and work approach of the heating, plumbing, and ventilation companies involved.
Some trades have already been contracted, and part of the equipment has already been ordered.
I’m really looking forward to getting started and to the final result. The goal is to move in by the end of 2019.
Once again, many thanks for the information I have received from you so far.
If you have any questions, just let me know.
Attached is the design, though not the final version. There have been a few minor changes.
Greetings from Swabia
The Swiss mechanism keeps ticking precisely
As @Dr Hix pointed out correctly in another thread, everything is done with great attention to detail and the best materials.
Well sealed:
Today, the panes were installed, which will not come into contact with the poured asphalt, for example in the pavilion.
(small) pane on the hook:
Panes installed:
This way, progress can continue. If the utility connection works out tomorrow, I’ll be happy.
Currently, the winter windows are still being installed so that interior work can begin.
As @Dr Hix pointed out correctly in another thread, everything is done with great attention to detail and the best materials.
Well sealed:
Today, the panes were installed, which will not come into contact with the poured asphalt, for example in the pavilion.
(small) pane on the hook:
Panes installed:
This way, progress can continue. If the utility connection works out tomorrow, I’ll be happy.
Currently, the winter windows are still being installed so that interior work can begin.
Tina mit K5 Dec 2019 13:56Oh, it looks like your winter wonderland is already in full swing, judging by the trees in the background. How cold is it there? In weather like this, I always feel sorry for the people working on construction sites. Hopefully, everything is going smoothly with the utility providers. Some of the workers can be a bit difficult.
Last night it was "only" -4 degrees Celsius (24.8°F). Yesterday it was -8 degrees Celsius (17.6°F).
At the moment, the sun is shining (just like yesterday) and the sky is a clear blue. In the sun, it's a pleasant 4-6 degrees Celsius (39.2-42.8°F).
However, this weather has only been like this for two days. The week before, temperatures were consistently above freezing.
At the moment, the sun is shining (just like yesterday) and the sky is a clear blue. In the sun, it's a pleasant 4-6 degrees Celsius (39.2-42.8°F).
However, this weather has only been like this for two days. The week before, temperatures were consistently above freezing.
rick2018 schrieb:
The Swiss mechanism keeps ticking precisely.
As @Dr Hix correctly pointed out in another thread, this project is carried out with great attention to detail and the best materials.
Well sealed:
Today, the panes were installed in areas where they will not come into contact with the cast asphalt, for example in the pavilion.
(small) pane on the hook:
Panes installed:
This can continue like this. If things go smoothly with the utility provider tomorrow, I’ll be happy.
Currently, the winter windows are still being fitted so that interior work can begin. I feel sorry for the tradespeople when I see the weather, even though the heat is far more dangerous.
@tumaa The weather isn’t that bad right now. I was on the construction site for several hours today. A thick jacket and warm shoes are enough. And the workers are moving around as well. It was completely sunny from midday onwards.
@Climbee Thanks
This is how it looked this evening. The winter windows are already installed on the ground floor. Now there’s no draft anymore.
@Climbee Thanks
This is how it looked this evening. The winter windows are already installed on the ground floor. Now there’s no draft anymore.