Hello everyone,
First of all, I hope this is the right section.
I have received several quotes for the shell construction. I’d like to share the one I currently feel best about; it is affordable, and the owner seems both professional and friendly. The references also looked great.
What do you think of this offer? Should I ask for any changes?
Thanks!!!
PS: I could also share the other offers (they are more expensive, but that doesn’t necessarily mean anything)……
First of all, I hope this is the right section.
I have received several quotes for the shell construction. I’d like to share the one I currently feel best about; it is affordable, and the owner seems both professional and friendly. The references also looked great.
What do you think of this offer? Should I ask for any changes?
Thanks!!!
PS: I could also share the other offers (they are more expensive, but that doesn’t necessarily mean anything)……
MayrCh schrieb:
You are building—somehow—in an industrial zone, right next to a carpentry workshop?
This brick, even combined with external thermal insulation composite system (ETICS), is practically useless for soundproofing due to its low bulk density of only 750 kg/m³ (47 lb/ft³) and is basically on par with a similarly low-grade aerated concrete block.
Did the building authority approve the wall thickness in the industrial zone without any objections? That would be the height of absurdity...Next to me is the warehouse; the noise from the production (located on the other side of the warehouse) is hardly noticeable.
G
Grantlhaua26 Mar 2019 10:30tumaa schrieb:
Next to me is the warehouse; the production area (which is on the other side of the warehouse) is hardly audible.But you’re not going to have a 175mm (7 inch) exterior wall, right?
Grantlhaua schrieb:
But you’re not going to have a 17.5cm (7 inch) exterior wall, are you?Uhhh, that’s what’s currently planned... how else would it be?
G
Grantlhaua26 Mar 2019 10:34tumaa schrieb:
ööööö, so far this is the plan .....how else should it be?Are you using facing bricks? Then I’m out on how that will be done. But an exterior wall is generally built with bricks no less than 36.5cm (14.4 inches) thick.
Grantlhaua schrieb:
Are you getting facing bricks? That’s where I drop out, as to how that will be implemented. But an exterior wall is generally built with bricks at least 36.5cm (14 inches) thick.Yes, we are getting facing bricks.
I had previously spoken with the facing brick planner/producer... with a 43cm (17 inches) wall, I’m in the safe zone.
Similar topics