ᐅ Architect’s Responsibilities Regarding KfW Funding Interest and Additional Matters

Created on: 13 Jul 2018 11:44
R
Ruhrgebiet23
Hello everyone,

We purchased a house in February this year. It’s a semi-detached house from the 1950s, generally in good, old condition. It quickly became clear to us that we wanted and were able to invest a significant amount of money (up to around 300,000,000 Euros) to have everything done “properly.” We found an architect through a distant acquaintance who accompanied us for the inspection in December.

The purchase was completed in February, and we hoped for a quick submission of the building permit / planning permission application — we intended to renovate everything (new heating system, pipes, insulation, windows, etc.) and extend the back. We already had a draft design, which was roughly adopted and, of course, detailed further. The architect informed us at the second meeting that he had a new employee who would be responsible for our project. We were a bit surprised but accepted it. Some mistakes have been made by him (e.g., compass directions on the building permit incorrectly shown — my husband noticed this before submission; errors concerning the development boundaries, which, however, were never acknowledged), but that is not the main point here.

The original architect quickly made it clear that he was rather skeptical about insulation. As a result, we also assumed that achieving low-energy house standards or similar would not be possible. However, we stated early on that we were very interested in a photovoltaic system for hot water.

The building permit / planning permission was submitted three months ago, and since then we have been waiting — no one is responsible for the delay (at least not the architect). Meanwhile, we have been constantly trying to discuss KfW (government) funding programs with the architects. Both say that adapting the house to be age-appropriate is easier to implement than energy-efficient renovation. Because we persistently asked, they have now admitted that funding measures for energy-efficient renovation are also possible. Regarding further information, they consistently refer us to a financial advisor, who can only tell us that loan terms there are generally better than at our regular bank. We have now brought in an energy consultant to assess what really makes sense for our property. She believes that insulation according to the Energy Saving Ordinance is quite reasonable and not much more expensive. She met with the architects earlier this week.

We have already asked the architects several times to prepare a detailed cost breakdown — so far, we only have a rough estimate from 02/2018. But in order to decide what kind of funding might be suitable FOR US, we need comparable figures. Is that really too much to ask? What can we reasonably expect from the architect? He is contracted for all phases of the project.

We feel that the architects simply want to keep the planning effort as low as possible. We have to raise many issues multiple times before they are considered. For example, we asked for a drywall partition wall to the neighbor to be planned. At the last meeting, we were asked to finalize the kitchen plan as soon as possible. When we finally got the dimensions, we asked again if the drywall partition had been included. It had not. This has been repeated with many things so far, where we as laypeople have to remind them constantly. We certainly will not be able to think of everything... The new architect independently handles the exterior design of the entrance area — when we point out efflorescence in the basement, he replies that he can look into it during construction. We are laypeople, but their priorities don’t seem very logical to us...

Maybe I’m mistaken, so I would appreciate your assessments.

Best regards!
R
Ruhrgebiet23
28 Jan 2019 19:21
MayrCh schrieb:
I cannot place this statement. The awarding of the structural and civil engineering work was obviously the result of a tender process with a bill of quantities and contract award. That means the most economical offer was awarded the contract here. The prices were known in advance; it was simply that the quantities were poorly estimated.

However, we only received that one offer. And even then, only the overall contract without the completed bill of quantities. We only got that last week after asking.

I don’t want to claim that I recognized any excessive pricing. And of course, in hindsight, we should have requested the bill of quantities. But since the architect said it would fit within the cost plan, we trusted that.
M
MayrCh
28 Jan 2019 19:23
Ruhrgebiet23 schrieb:
What do you mean by saying that we are making it difficult for ourselves?

You are making it difficult for yourselves by making (contract) decisions based on limited technical knowledge and incomplete, sometimes defective, fundamental information under unclear conditions.
Ruhrgebiet23 schrieb:
But since no other offer from another drywall contractor was submitted at all, I almost suspect that by now.

Where did that suddenly come from? And what does that have to do with the shell construction and earthworks?
R
Ruhrgebiet23
28 Jan 2019 19:29
Sorry, construction supervisor. I’m already feeling a bit overwhelmed.

Yes, for the following trades, we will go through every single item one by one and will only sign once everything is clear and any additional costs have been explained.

I take it all back: We naively thought that the architect would act on our behalf and not that they would passively cause us financial harm. Now that things are becoming clearer, we also understand what a risk this item represented.
R
Ruhrgebiet23
28 Jan 2019 19:31
So as not to bother you any longer: Is there really nothing more that can be done here?

And for the future: Check and research every single item? That certainly won’t get any easier with the upcoming trades...
R
Ruhrgebiet23
28 Jan 2019 19:33
Does anyone perhaps have overviews for such inspections?
M
MayrCh
28 Jan 2019 19:42
Ruhrgebiet23 schrieb:
go through every single item

Unfortunately, this is pointless if the scope of services/the bill of quantities is flawed and the quantities behind it are incorrect or estimated.
For example, when it comes to excavation and disposal, the classification according to installation class/assignment value (Z0-Z2) is missing for me. Just disposing of Z2 material costs more than €50 per ton. In addition to landfill acceptance fees, handling, and sampling, the total cost per ton quickly adds up. In case of unclear specifications, hardly anyone is willing to bear the risk of disposing of Z2 material at their own expense.

tl;dr: Construction costs in single contracting depend entirely on the quality of the tender documents. If the bill of quantities is poor or unclear, high costs arise in individual items, extra costs due to quantity increases, and additional claims that are often already prepared before the contract is confirmed.