ᐅ Floor plan design shortly before submitting the building permit application

Created on: 2 Oct 2017 23:25
R
R.Hotzenplotz
Hello everyone!

As some users have requested before, I’m now starting a new thread with the current planning of our detached house, which is about to be finalized.

These are the preliminary drawings for the building permit / planning permission application, and I have one last chance to review them and point out any issues.

It still seems to me that there is less than 1.20m (4 feet) of space between the two wardrobes in the dressing room. Or am I seeing this wrong? Apparently, the rooms on the left and right were overlooked and not adjusted accordingly.

Two Velux ceiling spotlights are still planned to illuminate the upper floor hallway.

In the basement, on the right side in the upper room, a window similar to the one on the left basement side is an option.

We still haven’t decided on the T30 fire-rated door to the garage, even though it is shown in the plans. Most likely, for safety reasons and the limited use of the kitchen at the other end of the house, we will eventually forgo it.

User 11ant pointed out that the right window in child’s room 2 is suboptimally positioned. However, this could still be changed after submitting the building permit / planning permission application. Our architect thinks moving the window to the left would negatively affect the house’s exterior appearance. We’ll have to see about that.

Grundriss Kellergeschoss mit 3 Kellerräumen, Abstellraum, Flur, Haustechnik und Treppe.


Grundriss eines Hauses mit Keller, Flur KG, Haustechnik KG, Abstellraum KG und Treppen


Grundriss eines Hauses: Garage, Büro, Garderobe, Diele, WC, Küche, Wohn-/Essbereich.


Grundriss Dachgeschoss: Schlafzimmer, Ankleide, Bad, Dusche, zwei Kinderzimmer, Flur HWR Dachterrasse


Technischer Grundriss: Zentraler, ungenutzter DG-Bereich (193 m²) mit umlaufenden Dachschrägen.


Schnitt durch mehrstöckiges Wohnhaus mit Keller, Treppe, Dachkonstruktion und Maßlinien.


Moderne Wohnhausansicht: zweigeschossiges Gebäude mit Garage links und großen Fenstern.


Architektonischer Haus-Elevationsplan: Keller bis Dachgeschoss, Dach, Fenster, Geländeprofil.


Moderne zweigeschossige Hausansicht mit Flachdach, Balkonen, großen Fenstern und Garage.


Zweistöckiges Haus mit dunkler Fassade, grauem Dach, Balkon rechts und Garten mit Bäumen.
11ant22 Dec 2017 23:07
R.Hotzenplotz schrieb:
I'm curious to see how this will affect the costs.

Probably not as significantly as the 2.7% volume reduction might suggest at first glance. However, the second garage door should be covered, and there will also be a basic setup for automation included.
https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
R
R.Hotzenplotz
31 Dec 2017 15:41
The construction consultant also got in touch regarding the expected reduction in building costs. He estimates about 600 € per cubic meter. With approximately 41 m³ (43 cubic yards), that's not bad.

I suppose I now need to start looking into insurance, as the groundwork will likely begin in a few weeks. What’s the best way to proceed to find the right coverage package? I doubt it will be as convenient as comparing electricity providers via Check24.
M
matte
31 Dec 2017 17:11
Wow, 600€... For what exactly? Or is he including everything in that calculation?
R
R.Hotzenplotz
31 Dec 2017 17:17
What do you mean by including everything? We discussed that the building height will be reduced and the fair implications this should have on the house price.
M
matte
31 Dec 2017 17:22
Well, what is included in the price per cubic meter? Are these the pure construction costs, or do they also include additional building-related expenses? If these are just the construction costs, I find that quite expensive and would like to know which special features justify these costs.
R
R.Hotzenplotz
31 Dec 2017 17:23
It can only be pure construction costs. What else should decrease if only the building is slightly lower, but nothing else changes? That was the question he was asked.

How much does the contractor approximately have to reduce the price to compensate for the lower building height?