ᐅ Floor plan design shortly before submitting the building permit application
Created on: 2 Oct 2017 23:25
R
R.Hotzenplotz
Hello everyone!
As some users have requested before, I’m now starting a new thread with the current planning of our detached house, which is about to be finalized.
These are the preliminary drawings for the building permit / planning permission application, and I have one last chance to review them and point out any issues.
It still seems to me that there is less than 1.20m (4 feet) of space between the two wardrobes in the dressing room. Or am I seeing this wrong? Apparently, the rooms on the left and right were overlooked and not adjusted accordingly.
Two Velux ceiling spotlights are still planned to illuminate the upper floor hallway.
In the basement, on the right side in the upper room, a window similar to the one on the left basement side is an option.
We still haven’t decided on the T30 fire-rated door to the garage, even though it is shown in the plans. Most likely, for safety reasons and the limited use of the kitchen at the other end of the house, we will eventually forgo it.
User 11ant pointed out that the right window in child’s room 2 is suboptimally positioned. However, this could still be changed after submitting the building permit / planning permission application. Our architect thinks moving the window to the left would negatively affect the house’s exterior appearance. We’ll have to see about that.
As some users have requested before, I’m now starting a new thread with the current planning of our detached house, which is about to be finalized.
These are the preliminary drawings for the building permit / planning permission application, and I have one last chance to review them and point out any issues.
It still seems to me that there is less than 1.20m (4 feet) of space between the two wardrobes in the dressing room. Or am I seeing this wrong? Apparently, the rooms on the left and right were overlooked and not adjusted accordingly.
Two Velux ceiling spotlights are still planned to illuminate the upper floor hallway.
In the basement, on the right side in the upper room, a window similar to the one on the left basement side is an option.
We still haven’t decided on the T30 fire-rated door to the garage, even though it is shown in the plans. Most likely, for safety reasons and the limited use of the kitchen at the other end of the house, we will eventually forgo it.
User 11ant pointed out that the right window in child’s room 2 is suboptimally positioned. However, this could still be changed after submitting the building permit / planning permission application. Our architect thinks moving the window to the left would negatively affect the house’s exterior appearance. We’ll have to see about that.
R
R.Hotzenplotz3 Dec 2017 10:2111ant schrieb:
So from the ground floor level up to the stair handrail height leading to the upper floor? – that’s also how I would prefer it. I would then use stainless steel as the top finish of this “railing wall”; and on the basement side, a handrail.Yes, exactly. That’s what we had in mind.
For the upper floor, we are still unsure. Upstairs, we could imagine that a stainless steel railing would be fine. However, a wall is also possible there. I tend to prefer a wall, while my wife prefers stainless steel. Downstairs, we already agree that a stainless steel railing would not fit.
Alex85 schrieb:
(adsbygoogle = window.adsbygoogle || []).push({});
Are the different heights of the doorways intentional?No, definitely not. I hadn’t noticed before either that the height is off in the visualization. It’s even clearer in the attached files. On Friday, I already discussed the inconsistent door widths with the architect during the detailed planning phase. However, I believe there is an error in the visualization because the floor plan always specifies a height of 2.13 m (7 ft). Both doors are now planned to be widened to 1.01 m (40 inches). Additionally, a corresponding standardization on the ground floor is being considered. A further increase in height is also being reviewed due to the ceiling height.
Attached again is the ground floor plan.
I tend to prefer a classic country house style. There are such beautiful wooden side panels available for staircases. I wouldn’t even know which one to choose first. But that’s probably not your style.
However, I also find glass completely unsuitable here. I can’t get excited about stainless steel either. It literally feels cold. Besides, you always see fingerprints on it, which looks messy.
Above all, I would make sure that the staircase and wall match the doors. Have you already selected those?
However, I also find glass completely unsuitable here. I can’t get excited about stainless steel either. It literally feels cold. Besides, you always see fingerprints on it, which looks messy.
Above all, I would make sure that the staircase and wall match the doors. Have you already selected those?
kaho674 schrieb:
If there is going to be a wall in front of the staircase, you might also consider a door leading to the basement.
Not a wall, more likely a masonry balustrade.
Isn’t it true that a staircase looks different from the side than when viewed from the top or bottom, as is often the case?
The perspective in your mind is already somehow fixed, right?
You consciously choose to see it that way.
So I’m surprised that the design hasn’t been finalized yet.
For months, I actually thought that with this view you knew exactly what you would get.
Stainless steel balusters look different from above than lengthwise. A solid wall looks bulky from above.
A glass panel reflects.
I would probably build all balustrades in masonry.
That would have been decided in advance for me.
R.Hotzenplotz schrieb:
On Friday, I already discussed the inconsistent doors with the architect during the detailed planning stage – though this was regarding the width. However, I believe there is an error in the visualization because the floor plan consistently indicates a height of 2.13m (7 feet). I suspect that after the removal of the transom window, the frame height wasn’t adjusted.ypg schrieb:
I’m surprised that the final implementation hasn’t been decided yet. I feel the same way.ypg schrieb:
Stainless steel bars look different from a top view than from a side view. A wall panel appears bulky from above. It seems we have different images in mind (?)https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
Similar topics