ᐅ Floor Plan Design for a 280 m² Single-Family Home on a Slope

Created on: 1 Oct 2017 19:05
D
Dark_Templar
D
Dark_Templar
1 Oct 2017 19:05
Hello everyone,

I would like to gather as many opinions and experiences as possible regarding my current floor plan. After all, building a house usually happens only once, so it needs to be right. What potential issues do you see in the design? Any kind of criticism or ideas are welcome.

The plot is quite complicated (see topography in the attachment):
The street/driveway is at 815.90 meters (2677 ft), the ground level ranges between approximately 809.xx and 810.xx meters (2654-2657 ft) --> about 6 meters (20 ft) height difference to the street and about 1 meter (3 ft) within the building site.

Therefore, the living floor is on the ground level, bedrooms, utility/technical room in the basement, and office/guest/cellar also in the basement. In the floor plan, guest and office rooms in the basement are swapped: the office is the larger room.

Development plan/restrictions
Building window, building line and boundary: flexible, current exceedances are not an issue
Roof type: flat roof, presumably according to K2
Style: Bauhaus, modern
Orientation: southeast, facing the valley

Client requirements
Number of occupants: 2 adults, 1 toddler, 1 baby
No fireplace
Audio/stereo setup: home theater in the living room, to be installed in a media wall along the 4.50-meter (15 ft) long wall.

House design
Estimated price according to architect/planner: 700,000-800,000 euros (excluding land)
Personal price limit for the house, including fittings: 900,000 euros
Preferred heating technology: certain: controlled residential ventilation, home theater, gas heating with solar, air conditioning on the ground floor. Under consideration: light bus system (Busch Free@Home)

Note: Attachments will follow as I currently do not have sufficient rights to upload them 🙁
Y
ypg
1 Oct 2017 20:54
It is now possible to attach files in the first post.
There are no restricted permissions here.

Mobile greetings from on the go
D
Dark_Templar
1 Oct 2017 21:20
Here are the attachments 🙂

CAD site plan of a plot in DXF format with boundary lines and coordinates.
RobsonMKK1 Oct 2017 22:05
Plans NOT as PDF
D
Dark_Templar
1 Oct 2017 22:15
Rather?
Y
ypg
1 Oct 2017 22:38

Similar topics