ᐅ Electrical Installation During the Shell Construction Phase

Created on: 20 Apr 2017 14:48
H
Hendrik007
Hello everyone,
I need to finalize the electrical planning for my new apartment construction soon. I have already incorporated many great ideas from the forum, such as bedside lamps that can be switched from the door. Thanks for that.
Now I would like to ask the experts here if they know of any other useful tips. Sometimes a small effort during the rough construction phase can have a big impact, or you only realize after completion what could have been done better or differently.

Basically, the following is planned for our 4-room ground-floor apartment:
  • Power outlet in each room below the light switch
  • Double power outlets in all corners of the living and bedrooms
  • Sixfold power outlets where the TV will be mounted on the wall, plus empty conduit for the wall-mounted TV
  • In the living room, two outlets near the entrance will be switchable for lamps (or Christmas lights)
  • The same setup in the bedroom for the bedside lamps
  • In the bathroom: double outlet by the mirror and in a corner where bathroom furniture will be placed, as well as under the heater and power supply to the toilet to prepare for a shower toilet
  • Double outlet on the terrace and a power cable to the back of the garden (where a garden shed will be built eventually) – all switchable from inside
  • Outdoor power above the terrace door in case a retractable awning is installed there
  • Network cables laid in a star topology to each bedroom and the TV corner, running to the router in the storage room
  • Obviously, plenty of power outlets in the kitchen
  • Roller shutter switches by each window and one central switch in the hallway for all
  • TV connections in each bedroom and the living room
  • Telephone and internet connection point in the storage room

Do you have any additional ideas?
Best regards
H
Hendrik007
25 Apr 2017 13:36
And what does Accesspoint stand for? AVM doesn’t have one, right?
11ant25 Apr 2017 13:42
Hendrik007 schrieb:
And what does access point stand for? AVM doesn’t have those, right?

Access point – that is a device category, in German: Zugriffspunkt.
https://www.instagram.com/11antgmxde/
https://www.linkedin.com/company/bauen-jetzt/
RobsonMKK25 Apr 2017 14:44
11ant schrieb:
Äckßäßß Peunt

That must be seriously hilarious...
C
Caspar2020
25 Apr 2017 15:37
The Fritz repeaters can do that as well. This feature is called a LAN bridge.

And above all, they can share the settings from the Fritz box.
H
Hendrik007
25 Apr 2017 16:39
Wouldn't a LAN bridge be created if I connect a device to the repeater using a network cable? I actually want to connect the repeater to the LAN...
C
Caspar2020
25 Apr 2017 19:37
The mode also exists. However, it is called WLAN Client Mode.

With LAN Bridge, you do exactly what you described last. AVM also provides colorful diagrams.