Hello,
I will soon start renovating a house, of course step by step.
Since I would prefer not to replace the doors because of the plastering and so on, I have the following question:
Is the door shown in the photo (there are about 6 similar doors in the house) paintable with a primer coat and 2-3 rounds of sanding? I would like to paint it white.
Thanks to everyone
I will soon start renovating a house, of course step by step.
Since I would prefer not to replace the doors because of the plastering and so on, I have the following question:
Is the door shown in the photo (there are about 6 similar doors in the house) paintable with a primer coat and 2-3 rounds of sanding? I would like to paint it white.
Thanks to everyone
S
stefanski28 Oct 2016 09:38I just came across this great post.
They must be the exact same doors! So I can do it that way.
They must be the exact same doors! So I can do it that way.
Musketier schrieb:
even if it might cost a few € more That’s funny, I think a new door would be cheaper. 😉
stefanski schrieb:
So you advise against using paint stripper and suggest sanding directly instead? In this case, yes, because it’s not necessary. After a thorough cleaning, sanding as described is sufficient.
S
stefanski28 Oct 2016 10:18I agree with that....^^
No, I think it looks great and doable just like described in the video!
Thanks to you all
No, I think it looks great and doable just like described in the video!
Thanks to you all
Neige schrieb:
That's good, I think getting a new door would be cheaper. 😉OK. I've never dealt with that before.